INDEX OF
JOURNALS
From
Volume 1 - No1 - Mar 1964 to Volume 44 - No4 - Oct
2006
Index complied by Fred G Porter (MBSSG)
Tips and Tricks
| Subject | Vol No | Issue No | Page No | Scanned Y/N |
| Blow Tube Clip | 25 | 2 | 82 | No |
| Blowing Attachment for Lathes | 37 | 1 | 35 | No |
| Blowing Device for Lathes | 40 | 3 | 97 | No |
| Blowing Swivel | 39 | 2 | 66 | No |
| Brass Butterfly for Dewar Assembly | 14 | 1 | 23 | No |
| Brass Formers for Angles | 33 | 2 | 79 | No |
| Carbon Lathe Tools | 1 | 2 | 32 | No |
| Cleaning Glassware Patent Chemical Cleaner | 14 | 4 | 101 | No |
| Coil Winding Adaptor for Jet 7 Burner | 25 | 2 | 61 | No |
| COOLHEAT Cream | 10 | 4 | 103 | No |
| Cork holder | 33 | 2 | 7 | No |
| Cracking off method Lathe Operation | 40 | 4 | 138 | No |
| Cutting Machine for Refractory Tubes | 1 | 2 | 32 | No |
| Cutting Short Pieces of Glass Tube | 33 | 2 | 78 | No |
| Cutting Short pieces of Rod | 39 | 4 | 124 | No |
| Drilling Holes in Odd Shaped Bottles | 25 | 4 | 150 | No |
| Drilling Holes | 37 | 2 | 74 | No |
| Emergency Shut-Down Valve | 37 | 2 | 63 | No |
| Expansion Compensating Clamps | 8 | 1 | 7 | No |
| Finned Aluminium Spools for Sun and Planet Chucks | 20 | 3 | 40 | No |
| Flanged Lids -a Method of Construction | 26 | 3 | 99 | No |
| Flat Lap Restoration | 37 | 2 | 76 | No |
| Forming Tool for Ampoules | 36 | 2 | 87 | No |
| Forming Tools in Cast Iron | 44 | 4 | 158 | No |
| FULGURAN Grip Improver | 35 | 1 | 41 | No |
| GETTEROFFERER Conway | 15 | 1 | 23 | No |
| Glass Disc Grinding Jig | 26 | 2 | 58 | No |
| Glass Manipulation by Flames | 36 | 4 | 172 | No |
| Glass or Brass Handle for the Carbon Reamer | 2 | 2 | 20 | No |
| Glass Tube Cutting Jig | 25 | 2 | 61 | No |
| Guillotine Tape Cutting | 42 | 2 | 57 | No |
| Grinding Parallel Rod and Using Stoppers | 26 | 2 | 59 | No |
| Hard Steel Glass Knife | 18 | 3 | 69 | No |
| Heat Exchangers | 26 | 1 | 22 | No |
| Holders | 7 | 4 | 41 | No |
| Holes 755mm in flasks | 41 | 3 | 113 | No |
| Internal Cutting with Diamond Rollers | 9 | 3 | 38 | No |
| Jig for Condensers and Stopcocks | 22 | 1 | 18 | No |
| Joint Holder | 7 | 4 | 42 | No |
| Joints Glass Modification to | 41 | 3 | 114 | No |
| LABORM Clips | 31 | 4 | 150 | No |
| Measurement of Small Volumes | 36 | 1 | 34 | No |
| Micro Torch Jets From Hypodermic Needles | 34 | 4 | 158 | No |
| Millifiori Cutting | 37 | 2 | 72 | No |
| Miniature Chuck | 7 | 4 | 41 | No |
| Modification to a Diamond Tooled Glass Saw | 9 | 4 | 57 | No |
| Modification to a Jet 7 Burner | 31 | 3 | 101 | No |
| Modification to Cutting Machine for Glass Grinding | 3 | 2 | 33 | No |
| Modification to Lathe Chucks | 21 | 2 | 41 | No |
| NO-BLOW Glassblowing | 31 | 3 | 107 | No |
| Operating a Hydrogen Furnace | 29 | 2 | 48 | No |
| Pot Working Tools | 37 | 2 | 64 | No |
| Problems with Interfacing Materials When | 41 | 3 | 113 | No |
| Rat Mask - Updated Design | 27 | 4 | 190 | No |
| Removing Stuck Ground Glass Joints | 24 | 3 | 96 | No |
| Rollers - Lathe | 37 | 1 | 35 | No |
| Sawing Cutting of Glass | 40 | 3 | 91 | No |
| Scroll Chuck Adaptor | 26 | 1 | 22 | No |
| Setting Up a Workshop | 37 | 2 | 65 | No |
| Simple Flange Holder | 3 | 2 | 33 | No |
| Slow Running Attachment for a Lathe | 3 | 2 | 33 | No |
| Stopcock Extractor | 2 | 1 | 9 | No |
| Super Cooled Bench Tyslide and Simple Jacket | 26 | 4 | 147 | No |
| Swivels for Bench or Lathe | 35 | 1 | 41 | No |
| T Piece Holders | 31 | 4 | 148 | No |
| The V Block of Wood in Shaping of Work | 17 | 4 | 94 | No |
| Tool for Cutting Holes or Washers | 13 | 3 | 57 | No |
| Tools Grinding | 41 | 3 | 115 | No |
| Tooling Bar (Bar Talk) | 37 | 1 | 33 | No |
| Tools for Ultrasonic Drilling | 6 | 2 | 36 | No |
| Transparent Non Silicone High M.P. Vacuum Grease | 17 | 3 | 74 | No |
| Working Ground Glass Joints | 17 | 3 | 74 | No |
©2000 The British Society of Scientific Glassblowers.